Who is Responsible for the Death of Romeo and Juliet

In the play Romeo and Juliet there are lots of events that lead to the death of the two main characters. There are many people responsible for the death of Romeo and Juliet and some of these characters are Tybalt, Capulet and Friar Lawrence. In the play, Tybalt has a large influence on the death of Romeo and Juliet. He helps contribute to their deaths because he kills Mercutio and Romeo in turn kills Tybalt which causes Romeo to be banished from Verona. Then Juliet tells â€Å"Romeo is banished!† â€Å"There is not end no limit, measure, bound. In that word’s death: no words can that woe sound.† (Act III Scene II 128-130) If Romeo had taken the time to think before killing Tybalt he would not have killed him and therefore he would not be†¦show more content†¦Friar Lawrence plays a big part in causing the death of Romeo and Juliet because he secretly marries them knowing something either negative or positive will happen. Friar even tells Romeo the cautions for he says Wisely and slow. They stumble that run fast. (Act II Scene III 97) Friar marries them because he thinks that the marriage is going to end the feud between the families of Romeo and Juliet. He knows that even though Romeo and Jul iet are in love they will never be able to see each other. Not in a grave to lay one in, another out to have† (Act II scene III 85) Also, if Friar Lawrence did not give Juliet the potion that she was going to use to deceive her family into thinking she was dead to get out of her marriage to Paris and make Romeo aware of what was going to happen, their deaths would not have occurred. Romeo goes to the tomb thinking Juliet is really dead after Balthasar accidently informed him of Juliet’s apparent death not knowing of her plan. If he had stayed there longer without taking the poison he had obtained from Apothecary they both would not have killed themselves. He brought the poison to the tomb to end his own life next to Juliet after seeing for himself if she was really dead. Romeo did not want to live without Juliet. Capulet also played an important role in the death of Romeo and Juliet because he told Juliet that she was going to marry Paris and she had no choice. ByShow MoreRelatedWho is Responsible for the Death of Romeo and Juliet? 778 Words   |  3 Pagesthe tragic play Romeo and Juliet by William Shakespeare, Romeo met Juliet from an enemy family in a party that he was not supposed to attend, and they quickly fell in love. Of course, this forbidden love brought unfortunate luck, and both Romeo and Juliet died at the end of the play. Who shall be held responsible for the death of Romeo and Juliet? This question has been bothering people, and yet to be answered. There are indeed many variables that have affected this, but I think Romeo himself is responsibleRead MoreWho Should Be Held Responsible for the Death of Romeo and Juliet?1032 Words   |  4 PagesRecently we have read the renown tragic play of Romeo and Juliet, by William Shakespeare. As we all know, this tragedy ends by the untim ely death of Juliet and her Romeo. But after putting down the book, a question comes to mind: who is truly at fault for the death of those two teenagers? Who is truly responsible for turning this story into a tragedy? Or is anyone even guilty at all? After some reflection, I have come to the conclusion that nobody is really at fault, but that everybody did a littleRead MoreWho is Responsible for the Tragic Deaths of Romeo and Juliet Essay1139 Words   |  5 PagesWho is Responsible for the Tragic Deaths of Romeo and Juliet Romeo and Juliet, a tragedy written by William Shakespeare in the 16th Century all about two strong hearted teenagers in the city of Verona in Italy who fall in love with each other as star crossed lovers. The two young teenagers of feuding families were destined to fall in love, however many problems occur to the extent of suicide, that affect their relationship, one of the main factors is the feud between Read More Who is Most Responsible for the Deaths in William Shakespeares Romeo and Juliet639 Words   |  3 PagesWho is Most Responsible for the Deaths of Romeo and Juliet Romantic love stories are often ended with a tragedy, because of loss of passion or a loved one. These tragedies are often the result of one person’s actions that ended someone’s life or love. In the Romeo and Juliet play written by William Shakespeare, two citizens of Verona come together and fall deeply in love. Unfortunately their love comes to an end, along with their lives, because of a misunderstanding and a persistent feud betweenRead MoreEssay about Who Is Responsible for Romeos Death742 Words   |  3 Pages25 January 2012 Who is Responsible for Romeo’s Death In the play Romeo and Juliet by William Shakespeare there is much debate about who is responsible for Romeo’s death. Romeo and Juliet is a play where two forbidden lovers get married in secret despite their families’ feud. After Tybalt, Juliet’s cousin, kills Mercutio, Romeo’s best friend, Romeo kills Tybalt and is banished from Verona with the promise of death upon return. Lord Capulet plans to force Juliet to marry a man named Paris, butRead MoreWilliam Shakespeare s Romeo And Juliet977 Words   |  4 Pagesplay, Romeo and Juliet by William Shakespeare. It is a tragedy about two lovers, Romeo and Juliet, who unfortunately, belong to families who bear an ancient grudge against each other. In the play, Romeo and Juliet fall in love and quickly decide to marry each other. At the end, Romeo and Juliet’s decisions cause their untimely death, but in reality, there were other people who also contributed to the lover’s death. Friar Laurence, the Nurse and Lord Capulet are responsible for the tragic deaths of RomeoRead MoreWilliam Shakespeare s Romeo And Juliet1521 Words   |  7 Pagesgoes wrong, people will point fingers and blame the person responsible. In William Shakespeare’s story, â€Å"Romeo and Juliet,† two teenagers fall in love with each other, but due to some characters’ actions, Romeo and Juliet die. Their loss turns the love story into a tragedy. The Capulet’s house, Friar Laurence, and Romeo can be held responsible for the tragedy of Romeo and Juliet. The first ones to be blamed for the tragedy of Romeo and Juliet are the people in the Capulet’s house because of the mistakesRead MoreThe Death of Romeo and Juliet and Who is to Blame Essay examples1376 Words   |  6 PagesThe Death of Romeo and Juliet and Who is to Blame Romeo and Juliet is a tragedy by William Shakespeare, in which a young boy and girl fall in love and commit suicide. They come from 2 different families which have a deadly feud against one another. Romeo goes to a masked ball at the Capulets household where he falls in love with Juliet. He then proposes to her after the party in secret at Juliets balcony. Romeo then arranges a secret weeding with Friar Lawrence andRead MoreEssay about Responsiblity for the Deaths of Romeo and Juliet1508 Words   |  7 PagesResponsiblity for the Deaths of Romeo and Juliet The final tragedy in the play ‘Romeo and Juliet’ is the death of Romeo and Juliet. It’s a result of the feud of the two houses: Capulets and Montagues, but amongst other likely causes are the personalities of Romeo and Juliet. Romeo is ‘hot-headed’ and Juliet lacks experience in life because of her young age. Other characters who play a significant part in driving them to their deaths are: Tybalt, Mercutio, Friar LawrenceRead MoreRomeo and Juliet Persuasive Essay660 Words   |  3 PagesRomeo and Juliet Persuasive Essay This play is about a boy named Romeo and girl named Juliet. Their family are mortal enemies so that means that they are always fighting with one another. At a Capulet party Romeo and Juliet meet for the first time not knowing who each other are, until later that night that they are enemies. They begin to fall in love with each other and get married after meeting for one night. Then the drama gets to their head and they kill themselves. In Romeo and Juliet

Injection Safety in Outpatient Settings †Free Samples to Students

Question: Discuss about the Injection Safety in Outpatient Settings. Answer: Introduction A safe injection is considered to be one that causes minimum harm or damage to the patient and the health care worker. The skin tissues often get infected by the entry of bacteria through injection into the deeper tissues of the skin. Streptococcus pyogenes, Staphylococcus aureus and coryneform bacteria are the most common microorganisms that are responsible for the incidence of skin infection at sites of medication injection (Stevens et al., 2014). The standard medical practice involves usage of pre-medicated 70% isopropyl alcohol swab to cleanse a skin area prior to injection. This report will critically analyse the necessity of nurses swabbing skin sites before administration of an injection and will comment on its clinical significance. The authors designed a quasi experimental study to assess the necessity of using 70 % alcohol swab for skin preparation before administering injections by clinical and pathological assessments. The effects of 70 % isopropyl alcohol and no preparation before injection, was studied. The two groups included receiving intramuscular (IM), intra-dermal (ID) and subcutaneous (SC) injection after skin preparation with alcohol swabs (221) and those who did not receive skin preparation (186). The skin was swabbed for 30 seconds and allowed to dry before injection. The injection area was assessed after 2-3 days. Pathological assessments were carried out among 51 patients, with and without alcohol swabs and the bacterial colony forming units (CFU/ml) were measured. A statistical analysis showed that skin preparation with alcohol swab destroyed 47% skin bacteria at injection site. Further, no skin preparation failed to show any infection signs. The mean CFU/ml was significantly high (2.473.86) fo r patients without swabbing, compared to those where alcohol swab had been performed. The use of alcohol swabs also involved larger costs. Thus, the study showed that swabbing technique was an inadequate safeguard against infection and failed to show any significant differences in systemic effects and clinical signs. The limitation lies in the fact that the entry of microorganisms by the three ways of injection was not evaluated separately (Khawaja et al., 2013). Insulin is usually injected to the subcutaneous tissue through a clean site on the skin. The study recruited 225 patients with insulin dependent diabetes mellitus and conducted a survey on history of diabetes, preferred injection practices, use of isopropyl alcohol swabs to sanitize skin before injection, and complications that arise from such injections. 10 cases of infection were found among patients who reported use of alcohol swabs very often. Furthermore, patients reporting no use of swabs showed 14 infection cases. Therefore, the results were consistent with the previous findings that alcohol antisepsis before injection fails to reduce incidence of infection at the site. The validity of the findings added to the strength. However, limitations were found in the form of selection bias. Routine users of alcohol swabs might be concerned about infections and are more likely to recall them (ONeill et al., 2013). The need for disinfecting the skin with alcohol swab before injections has long been questioned by the WHO. This study discussed evidences based on current recommendations on pre-injection skin preparation by analysing various articles and arriving at a consensus. The theoretical observations showed that it is impossible to sterilise the living skin by the use of chemical disinfectants. A swab of isopropanol reduces the numbers by 82-91% only. The observations in practice showed that no statistically significant differences were observed in response to formation of abscess at the injection site in the alcohol swab group and no pre-treatment group. Thus, a consensus was formed that skin preparation can be discontinued before subcutaneous injections and would probably not lead to any adverse effects among people with visibly clean skins (Qamar, Gillani Sulaiman, 2012). Critical observation During our clinical placement we were given training on the different measures that need to be adopted for preparing the skin for intramuscular and subcutaneous injections. The clinical placement enhanced innovative thinking capabilities and also provided an insight into the practices that were followed to avoid adverse health outcomes such as infection and abscess formation in patients. During the third week of my placement, a patient Clara (name changed) got admitted to the ward due to extreme loss in weight and appetite. She was 18 years old and had been suffering from type-1 diabetes. She reported symptoms of frequent urination, fatigue, excessive thirst and blurred vision. On admission, I was assigned the task of measuring her blood glucose levels. On assessment, they were found to be extremely high (302 mg/dl). My mentor immediately decided to start insulin therapy in order to control the blood glucose. My clinical knowledge had created the understanding that an alcohol swab was the traditional method of subcutaneous injections (Zhang et al., 2015). However, I was asked to arrange for disposable gloves, antibacterial soap and water for skin preparation. An essential part of learning lies in the fact that nurses should feel motivated to seize such learning opportunities and gather information from the seniors. Therefore, I approached my mentor and inquired the reason for avoiding alcohol swab prior to insulin injection. My mentor said that alcohol swabs have been found to cause cracks and sorenessin people with sensitive skin (Kundrapu et al., 2014). It dries the skin and has not proved effective in preventing skin infections, as evidenced from research articles (Hirsch, Byron Gibney, 2014). Thus, an antibacterial soap and water are used to wash the hands and a cotton wool dipped in water is used to wipe the site before injecting insulin (Kinnunen Mrsny, 2014). I followed my mentor and washed my hands with the antibacterial soap and water vigorously for 15 seconds. I was made to wear gloves after washing for further protection. Furthermore, I learnt that shared alcohol swabs or their inappropriate use often lead to viral contamination such as HCV (Palmateer et al., 2014). Thus, proper care should be taken to ensure that the same swab is not used to disinfect other body parts, as this would increase the risk of bacteria entering the injection site. Some of the recommendations are as follows: It should be made compulsory for healthcare professionals to wash their hands prior injecting a drug (Thompson et al., 2016). Most community healthcare centres should have access to proper sanitation facilities and community members should be encouraged to clean soiled skin of patients before administering any injection (Steinmann et al., 2015). Although alcohol swabs have not shown any significant improvements in preventing infection, care should be taken that sterilised alcohol swabs are used on the skin in cases where water is not available (Lai?Kwon et al., 2014). Alcohol swabs should never be used on sensitive skin if symptoms of dryness and irritation are observed. The skin site should subsequently be cleaned prior to injection. Separate swabs should be used for disinfecting several body parts. The alcohol swabs should never be shared among patients. Conclusion Thus, it can be concluded that cleansing the area with swabs is a traditional practice and is thought to prevent entry of bacteria through the site, into the deeper layers of the tissue. However, research evidences have failed to show their effectiveness in preventing such infection. Moreover, usage of shared swabs has been associated with several forms of contamination, and leads to dryness of the skin. Thus, it is advisable for nurses to use soap and water to cleanse their hands and the skin surface before injecting a drug. Use of alcohol swabs is therefore not a mandatory clinical practice. References Hirsch, L., Byron, K., Gibney, M. (2014). Intramuscular risk at insulin injection sitesmeasurement of the distance from skin to muscle and rationale for shorter-length needles for subcutaneous insulin therapy.Diabetes technology therapeutics,16(12), 867-873. Khawaja, R. A., Sikandar, R., Qureshi, R., Jareno, R. J. M. (2013). Routine skin preparation with 70% isopropyl alcohol swab: is it necessary before an injection? Quasi study.JLUMHS,12(02), 109. Kinnunen, H. M., Mrsny, R. J. (2014). Improving the outcomes of biopharmaceutical delivery via the subcutaneous route by understanding the chemical, physical and physiological properties of the subcutaneous injection site.Journal of Controlled Release,182, 22-32. Kundrapu, S., Sunkesula, V., Jury, I., Deshpande, A., Donskey, C. J. (2014). A randomized trial of soap and water hand wash versus alcohol hand rub for removal of Clostridium difficile spores from hands of patients.Infection control and hospital epidemiology,35(2), 204-206. Lai?Kwon, J., Ly, L., Su, J. C., Nixon, R., Tam, M. M. (2014). Unsuspected allergic contact dermatitis to alcohol swabs following neurosurgery.Australasian Journal of Dermatology,55(4), 296-298. ONeill, J., Grinager, H., Smith, S. D., Sibley, S., Harrison, A. R., Lee, M. S. (2013). Isopropyl alcohol skin antisepsis does not reduce incidence of infection following insulin injection.American journal of infection control,41(8), 755-756. Palmateer, N., Hutchinson, S., McAllister, G., Munro, A., Cameron, S., Goldberg, D., Taylor, A. (2014). Risk of transmission associated with sharing drug injecting paraphernalia: analysis of recent hepatitis C virus (HCV) infection using cross?sectional survey data.Journal of viral hepatitis,21(1), 25-32. Qamar, M., Gillani, S. W., Sulaiman, S. A. S. (2012). The Skin Preparation Knowledge, Attitudes and Practices among the Healthcare Professionals in Compliance with the World Health Organization (WHO) Guidelines.Journal of Clinical Diagnostic Research,6(6) 1041-1046. 6p. Steinmann, J., Becker, B., Bischoff, B., Steinmann, E. (2015). Alcohol hand rub or soap and water for removal of norovirus from handsthe debate continues.Journal of Hospital Infection,91(4), 371-372. Stevens, D. L., Bisno, A. L., Chambers, H. F., Dellinger, E. P., Goldstein, E. J., Gorbach, S. L., ... Wade, J. C. (2014). Practice guidelines for the diagnosis and management of skin and soft tissue infections: 2014 update by the Infectious Diseases Society of America.Clinical infectious diseases,59(2), e10-e52. Thompson, D., Bowdey, L., Brett, M., Cheek, J. (2016). Using medical student observers of infection prevention, hand hygiene, and injection safety in outpatient settings: A cross-sectional survey.American journal of infection control,44(4), 374-380. Zhang, L. J., Guerrero-Juarez, C. F., Hata, T., Bapat, S. P., Ramos, R., Plikus, M. V., Gallo, R. L. (2015). Dermal adipocytes protect against invasive Staphylococcus aureus skin infection.Science,347(6217), 67-71.

A Memory essays

A Memory essays Landscape is an important aspect of writing. Through this technique, the author can express symbolism using the character's surroundings. From the external landscape of a character, the internal landscape develops. There is a strong connection between the external and internal landscape of a character. In "A Memory" by Eudora Welty, the author uses external and internal landscape from her childhood memories to recreate a child hood fictional world. Through the small frames of her fingers, Eudora Welty begins her story looking at the landscape surrounding her. She beings by noticing the sun and how beautiful it is. This observation occurs when Eudora is not complaining about people or her surroundings, and the sun represents a peaceful time in her internally. With every observation of a person, she is obsessed with the concealment and the secrets that are within a person. This external landscape secretly comes from the inside, where she hides her thoughts. In her childhood, Eudora Welty hid the love she had for a boy in her school. Internally, she was obsessed with the slightest touch of the boy. The author did not show this feeling on the outside, and he never knew her love for him. Possibly this emotion was not even love, but instead a longing for attention from the boy. Although she never got attention physically or emotionally from the boy, her thoughts about him gave her a meaning in life. This love, or whatever it was, that Eudora Welty once had is something she is trying to find in each person that she judges. She imagined a horrible external landscape for this boy. For example, she thought about his house catching on fire, or his parents becoming crippled. These thoughts indicated that internally she knew that boy was not perfect, and that she would never know everything about him or receive the boy's attention as she had wished. As Welty wonders with her thoughts, she brings bathers into her story. She describes ...

Ancient Roman Calendar Terminology

Ancient Roman Calendar Terminology The Ides Can Be on the 15th You may know that the Ides of March the day on which Julius Caesar was assassinated was the 15th of March, but that doesnt mean the Ides of a month was necessarily on the 15th. The Roman calendar was originally based on the first three phases of the moon, with days counted, not according to a concept of a week, but backward from lunar phases. The new moon was the day of the Kalends, the moons first quarter was the day of the Nones, and the Ides fell on the day of the full moon. The Kalends section of the month was the longest, since it spanned two lunar phases, from the full to the new moon. To see it another way: Kalends New Moon (no moon to be seen)Nones 1st quarter moonIdes Full Moon (whole moon visible in the night sky) When the Romans fixed the length of the months, they also fixed the date of the Ides. In March, May, July, and October, which were (most of them) months with 31 days, the Ides was on the 15th. On other months, it was the 13th. The number of days in the Ides period, from the Nones to the Ides, remained the same, eight days, while the Nones period, from the Kalends to the Nones, might have four or six and the Kalends period, from the Ides to the start of the next month, had from 16-19 days. The days from the Kalends to the Nones of March would have been written: Kal.ante diem VI Non. Mart.ante diem V Non. Mart.ante diem IV Non. Mart.ante diem III Non. Mart.pr. Non. Mart.Nonae The days from the Nones to the Ides of March would have been written: ante diem VIII Id. Mart.ante diem VII Id. Mart.ante diem VI Id. Mart.ante diem V Id. Mart.ante diem IV Id. Mart.ante diem III Id. Mart.pr. Id. Mart.Idus The day before the Nones, Ides or Kalends was called Pridie. Kalends (Kal) fell on the first day of the month. Nones (Non) was the 7th of 31 day months March, May, July, and October, and the 5th of other months. Ides (Id) fell on the 15th of 31 day months March, May, July, and October, and on the 13th of other months. Calendars | Roman Calendars Ides, Nones on the Julian Calendar Month Latin name Kalends Nones Ides January Ianuarius 1 5 13 February Februarius 1 5 13 March Martius 1 7 15 April Aprilis 1 5 13 May Maius 1 7 15 June Iunius 1 5 13 July Iulius 1 7 15 August Augustus 1 5 13 September September 1 5 13 October October 1 7 15 November November 1 5 13 December December 1 5 13 If you find this view confusing, try Julian Dates, which is another table showing the dates of the Julian calendar, but in a different format.

Business Emails Essay Example | Topics and Well Written Essays - 750 words

Business Emails - Essay Example I know that if I have had this experience, you must also have other stores that are in the same situation. I would even be willing to help share the cost of producing the catalog. Well Jack, think about this proposal. As I said, your product is second to none but we need to give the customer greater access to it. A full line catalog will increase my sales significantly and I'm not opposed to standing part of the expense of having a catalog printed. Let me know what decision you come to as soon as you can. We are entering our busy season and it would be good to move on this as soon as possible. When we entered into a contract for you to supply our store with custom made desks, we were guaranteed 8 weeks delivery. However, the last 2 orders took 12 weeks to get to the customer. There were several phone calls from you requesting more detailed information from the customer and each time the delivery was further delayed. This has caused problems for our customer and has reflected negatively upon our store and our sales staff. When the desks arrived, they were of excellent quality and there were no complaints on the product, but the late delivery and installation caused my customers to reschedule other design work that was pending. Please understand that there was a pe... We do not wish to enforce that clause at this time. We would prefer to have the product delivered as promised. I suggest we design a specification sheet that is more detailed than the one we currently use. Our staff can get all the information you need on their first customer contact. I understand that your custom made department is difficult to schedule and we have taken that into account. Again, we like your product and wish to continue to use your company to fill that customer need. We simply need to get the desks to our customers as promised to maintain our relationship with them. Please contact me as soon as possible to design a more complete order form. I look forward to hearing from you and working with you in the future. To: MEllington@Notmail.com From: TMartin@Thefurniturebarn.com Subject: Country of Origin May 17, 2007 Ms. Ellington, We have been purchasing fabric for our commercial office furniture for several years and have had few complaints. We recently noticed that some of the fabrics in your catalog were not exactly as labeled. For example, we purchased an Italian fabric for a customer and it was marked as 'Made in Indonesia'. I understand the use of the word 'Italian' may have a generic meaning, but our clients do not perceive it that way. To better inform our customers, I would like to get a country of origin list for your fabrics. I know this will take you some time to put together, but it would greatly aid our commercial clients in making a fabric decision. In addition, it could be used as a sales tool by offering the customer additional information about their custom made furniture. Please get back to me as soon as you can and let me know if there is anything that I can do to help you compile the list. If you could get me the

The potential of a Singapore Signature Treatment Dissertation

The potential of a Singapore Signature Treatment - Dissertation Example The paper tells that the tourism industry is very huge in Asia especially in South East Asia where a lot of tourists flock the region to enjoy. As a result, these tourists need to be treated and afforded quality services. There are various forms of relaxation and some of these methods include swimming, sightseeing and personalized services. Over the years, the personalized services industry has grown tremendously to include more specialized services such as foot messages or even hair treatment. One of the industries where people look for personalized services is the Spa industry. Singapore is one of the countries whereby Spas are operated by professionals who are recognized globally. Several top notch beauty companies have set up operations in Singapore as part of their strategy in tapping the Singapore market. Several established companies such as Mintel oxygen have produced reports that have shown that one of the reasons that stop people from paying for spas is the lack of appeal a nd this concept applies both on visual effect and treatment menu. As a result it is necessary to develop special treatment which is recognized in the Singapore market and the globe. Several countries such as Thailand and India have developed signature treatments that have attracted a lot of consumers. Due to the high completion in the Spa industry it is prudent for a country or region to a unique selling point that will attract customers the attention of customers. Therefore, Singapore should be geared towards development of a unique Spa experience in tandem with companies such as Decleor. The use of natural ingredients without preservatives and essential oils has had the result of easy penetration to the skin and therefore acting as an effective way of curing heart conditions. The combination of the highly skilled tourism industry in

Beeston Rylands Golf Course Essay Example for Free

Beeston Rylands Golf Course Essay Welcome to my GCSE ICT project. I will be basing my project around a local golf club. I have approached and asked them as to whether they required any ICT solutions. They replied saying that they already had an ITC consultant but had a few problems for which I could produce solutions. Above are some pictures of the course. It is widely regarded as one of the best golf courses in the region. It has over fifty registered members. The club is based in a suburb of west Nottingham. It is regarded as a beautiful piece of land in the middle of the modern town of Beeston. The main course is an eighteen hole Par 70 championship course that has been the host of many major amateur tournaments. It has even had the honour of playing host to the Senior Masters of Great Britain championship. It also has a nine hole par 27 junior course. Naturally the club has a restaurant, complete with licensed bar, and a shop selling all of latest equipment. There also are 4 practise putting greens. For entertainment there are two pool tables and a dartboard. The entrance to the golf club is quite secluded from the main road that runs through Beeston. The population of Beeston is around fifteen thousand. Interview I interviewed Mr Ian Smith the owner of the golf club to try to find possible tasks: RP: Hello, are there any problems in particular with the current system that requires any immediate work? IS: Nothing in particular, but we are struggling with the current system of recording members. The current system is non-computerised. It is currently very slow and subject to errors by staff. We are looking to create a database form it. RP: Anything else? IS: We currently do not have a web page or a logo. RP: What sort of content would you be looking for in a web page? IS: Not a lot really, just a simple homepage with details of our location and how to join; nothing fancy like e-commerce would be required. RP: Would you require a logo on a letterhead? IS: Not really, we already have a letterhead but it is a bit outdated. It is not a large problem however; we dont really need a logo on the letterhead more so on a web page etc RP: I understand the club has a golf store; does it need any promoting. IS: The club shop has been very successful in recent times. In the past we have had leaflets designed, printed and delivered by professionals, however this was a very expensive procedure but was effective. RP: How about tournaments, do they need promoting? IS: Well I suppose you could create posters but we dont think that they would be very successful. RP: Do you send letters to all members with the appropriate handicap notifying them about forthcoming events? IS: No, we currently leave letters at the front entrance with details of tournaments. A system such as you were talking about could prove to be very effective. RP: Have you ever advertised in local newspapers? IS: Yes we did at one time but it didnt prove very successful. RP: I also understand you have a restaurant and bar area, would you require any work in that area? IS: I dont think so but the menu may need rethinking, currently it is very difficult when prices are changed and new system in the changing of prices on the menu could be useful. RP: Thank You for your time, this should give me a good idea of what you require. IS: I hope it all helps. Analysing the Interview At present the golf club does not use a logo. They do, however, have a letterhead. They said that they would like it improving, maybe by adding a logo to it, but it would not be on top of the list of priorities. All records of members are non-computerised. This is a very large problem. They have never sent out individual letters to members concerning tournaments; they usually leave letters about the tournaments at the entrance to the club but believe a mail merge letter could work very well. The club does not have any sort of web page but does very much want to get online. The club has in the past had leaflets designed, printed and delivered by professional leaflet designers, however there is a possibility of creating a much cheaper costing solution. The menu was updated recently and needs little work, however a better system of changing prices could be of use. The club scorecard is very much out dated but more and more people seem to be using electric scoring systems. The club has never published any sort of poster to promote the club and thinks it is unlikely that it would have a great effect. The club did try a small advert in the local paper at one time but this did not seem to have much effect. The logo should be very simple. It should not use many colours. The main background should be white and any text on it should be in a greyscale colour i. e. black or grey. The reasons for this are that we would like the logo to feature prominently in our letterhead. The majority of our letters will be printed on a greyscale printer. We find that colour images may look very impressive on screen but when printed of on these types of printers the effect ends up being dramatically reduced. Letterhead As mentioned before, we would like the logo to feature prominently in the letterhead. We are looking for a modern look that has a unique effect. Space at the bottom of the page as well as the top could be used. It is imperative that it includes all contact details i. e. the clubs address, telephone and fax, website and email details should be included. The task as a whole is very open-ended. Database All we are really looking for is a system to store all of our member details on. We need a system that can filter out different types of members and players with different ranges of handicaps easily. Website Websites have become a very important part of any business. We do not want a very complicated website at this moment, we simply want to get onto the web. The site should maintain a high quality image of the club. It should contain a brief history of the club and some information about the facilities the club has. It should have all of the necessary contact details. There should be a fair amount of graphics showing off the club and the course. We believe we have a beautiful course here and we would like to show this to anybody visiting the website.